เป็นอุปกรณ์แปลงและรับส่งสัญญาณผ่านสายไฟเบอร์ออฟติกระยะไกล รองรับระยะไกลได้ถึง 25กิโมเมตร ความเร็วในการรับส่งข้อมูลที่ 1000 Mbps รูปแบบการรับส่งข้อมูล WDM (ใช้สายไฟเบอร์คอร์เดียว) เชื่อมต่อเป็นแบบ SC-Connector รองรับสายไฟเบอร์ออฟติก ชนิด Single Mode ใช้งานได้ทั้งระบบเครื่อข่ายอินเตอร์เน็ต หรือกล้องวงจรปิดแบบ IP Camera
                                         การันตี 20 วัน
 การันตี 20 วัน
                
เป็นอุปกรณ์แปลงและรับส่งสัญญาณผ่านสายไฟเบอร์ออฟติกระยะไกล รองรับระยะไกลได้ถึง 25กิโมเมตร ความเร็วในการรับส่งข้อมูลที่ 1000 Mbps รูปแบบการรับส่งข้อมูล WDM (ใช้สายไฟเบอร์คอร์เดียว) เชื่อมต่อเป็นแบบ SC-Connector รองรับสายไฟเบอร์ออฟติก ชนิด Single Mode ใช้งานได้ทั้งระบบเครื่อข่ายอินเตอร์เน็ต หรือกล้องวงจรปิดแบบ IP Camera
Media Converter 10/100/1000Mbps 25KM HYPERLINK
เป็นอุปกรณ์แปลงและรับส่งสัญญาณผ่านสายไฟเบอร์ออฟติกระยะไกล รองรับระยะไกลได้ถึง 25กิโมเมตร ความเร็วในการรับส่งข้อมูลที่ 1000 Mbps รูปแบบการรับส่งข้อมูล WDM (ใช้สายไฟเบอร์คอร์เดียว) เชื่อมต่อเป็นแบบ SC-Connector รองรับสายไฟเบอร์ออฟติก ชนิด Single Mode ใช้งานได้ทั้งระบบเครื่อข่ายอินเตอร์เน็ต หรือกล้องวงจรปิดแบบ IP Camera 
Main Features
-In accordance with IEEE802.3 10Base-T, IEEE802.3u 100Base-T, 
-Plug and play, high performance, Low power consumption
-IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-FX
-Supported Ports: SC for optical fiber; RJ45 for twisted pair 
-Auto-adaptation rate and full/half-duplex mode supported at twisted pair port 
-Auto MDI/MDIX supported without need of cable selection  
-Up to 6 LEDs for status indication of optical power port and UTP port  
-External and built-in DC power supplies provided  
-Up to 1024 MAC addresses supported 
-512 kb data storage integrated, and 802.1X original MAC address authentication supported
-Conflicting frames detection in half-duplex and flow control in full duplex supported 
-Card-type or stand-alone, apply in centralized management 2U aluminum chassis.
Specifications
| Product Name | 10/100/1000M Single Fiber ,Single Mode, Fiber Media Converter | 
| Standards | IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.1af DTE Power via MDI | 
| Wavelength | Single Mode 1310nm,1550nm | 
| Port | 1* RJ45 port, 1* Fiber(SC,FC,ST) (optional) | 
| Transfer | 0~120KM(optional) | 
| Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or more UTP (≤100 meter) | 
| Forward Mode | Store and forward | 
| LED Indicator | PWR: Green Illuminated to indicate unit is operating under normal operation TX Link/ACT: Green Illuminated indicates receiving link pulses from compliant copper device and flashes when data being sent / receivedFX Link/ACT: Green Illuminated indicates receiving link pulses from compliant fiber device 100M: Green Illuminated when data packets are being transmitted at 100 Mbps | 
| Power Supply | DC5V1A | 
| Environmental | Operating Temperature: 0°C~+70°C | 
| Requirements | Storage Temperature: -45°C~+95°CRelative Humidity: 0~95% (non-condensing) | 
เฉพาะซื้อออนไลน์ผ่านทุกช่องทาง
 บัตรเครดิต
 QR Code
 เก็บเงินปลายทาง
 ธนาคาร / ATM